Lab
As KOMSAN; we see that the automotive and other industrial sectors we serve serve to meet the developing quality needs as one of the most important services it offers to its customers. In order to adapt to the developing market conditions and to meet the quality needs of our customers, we continuously invest in quality equipment to meet current needs. With the profile projection device in the quality laboratory of our company; We can perform many measurements such as chamfer, angle, radius, inner diameter countersunk measurement, position control. Again with the surface roughness device in our quality laboratory; We can measure the inner diameter, outer diameter, channels, angled surfaces of the products we produce such as Ra, Ry, Rz, Rt, Rp, Rq, Rv at distances up to 25 mm. In order to provide better service to our customers and to meet the quality requirements expected by our business partners, our enterprise, which has increased its quality capability with the CMM investment we made in 2012, Wenzel LH 87 brand CMM machine, 800 mm in the X axis, 1500 mm in the Z axis, 700 mm in the Z axis, concentricity, secretion, Angle control has the ability to make geometric measurements such as control of hole positions, parallelism and flatness, and has the capability of measuring channel diameter, width inner diameter measurements with 1.8μm accuracy which is not possible with normal measuring devices. At the same time, we can design in-house control equipment and gauges depending on the properties of the products produced. In addition to these, we are also able to make dimensional and technical measurements of the products produced with touch-screen and coating thickness measuring devices. Thanks to all these equipments and our experienced quality personnel; we realize all kinds of quality needs of our customers and the quality processes of the products we produce within our company.